Technical data

Using the BayStack 350 Series 10/100 Autosense Switch
1-30
893-00992-D
Figure 1-20. Inter-Switch Trunk Configuration screen example
The Inter-Switch Trunk Configuration screen for switch SW1 is configured as
follows:
• Trunk field (read only) --- indicates the trunks (I1 through I4 for this switch)
that correspond to the switch ports specified in the Trunk Members fields.
• Trunk Members fields --- indicates the ports that can be configured, in each
row, to create the corresponding trunk:
– Ports 25 and 26 are assigned as trunk members of trunk I1.
– Ports 13 and 14 are assigned as trunk members of trunk I2.
– Ports 19 and 20 are assigned as trunk members of trunk I3.
– Ports 22 and 23 are assigned as trunk members of trunk I4.
Inter-Switch Trunk Configuration
Trunk Trunk Members STP Trunk Mode Trunk Status
----- ---------------------------- ------------ --------------- ------------
I1 [ 25 ][ 26 ][ ][ ] [ Enabled ] [ Enhanced ] [ Enabled ]
I2 [ 13 ][ 14 ][ ][ ] [ Enabled ] [ Enhanced ] [ Enabled ]
I3 [ 19 ][ 20 ] [ Enabled ] [ Enhanced ] [ Enabled ]
I4 [ 22 ][ 23 ] [ Enabled ] [ Enhanced ] [ Enabled ]
Valid inter-switch trunk configurations are:
1 or 2 trunks of up to 4 links each
Up to 4 trunks of 2 links each
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.