Technical data

Using the BayStack 350 Series 10/100 Autosense Switch
1-28
893-00992-D
The Server Trunk Configuration screen opens (Figure 1-18).
Figure 1-18. Server Trunk Configuration screen for Switch SW1
The Server Trunk Configuration screen for switch SW1 is configured as follows:
• Trunk field (read only) --- indicates the server trunks (S1 through S4) that
correspond to the switch ports specified in the Trunk Members fields.
• Trunk Members fields --- indicates the ports that can be configured, in each
row, to create the corresponding trunk:
– Ports 6, 7, 9 and 17 are assigned as trunk members of trunk S1.
• Trunk Status field --- indicates the Trunk Status for each of the trunks. When
set to Enabled, the configuration settings for that specific trunk are activated.
Note:
The screen items shown in boldface type represent example
configuration settings you could enter to obtain the topology configuration
shown in Figure 1-16
.
Server Trunk Configuration
Trunk Trunk Members Trunk Status
----- ---------------------------- ------------
S1 [ 6 ][ 7 ][ 9 ][ 17 ] [ Enabled ]
S2 [ ][ ][ ][ ] [ Disabled ]
S3 [ ][ ] [ Disabled ]
S4 [ ][ ] [ Disabled ]
Valid server trunk configurations are:
1 or 2 trunks of up to 4 links each
Up to 4 trunks of 2 links each
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.