Technical data

Getting Started
893-00992-D
1-21
Figure 1-13. VLAN Configuration screen for switch SW4
Additional Tips About Configuring VLANs
To group switch ports into logical workgroups, select the ports under the VLAN
name (V1, V2, ....., or V8) in the VLAN Configuration screen. If you want users
on different VLANs to share a port, select that port under each VLAN name.
You can create VLANs for one BayStack 350 switch, or you can create VLANs
that span multiple switches. However, each switch that participates in the VLAN
configuration must be configured individually. You can also assign multiple
VLANs to a port connected to a server, which allows the server to be shared by
multiple logical workgroups.
You can only create five VLANs when the MultiLink Trunking feature is active.
The VLAN Configuration screen displays five VLAN columns when any trunk is
enabled.
VLAN Configuration
Port Trunk V1 V2 V3 V4 V5 V6 V7 V8
---- ----- ----- ----- ----- ----- ----- ----- ----- -----
1 [ X ] [ X ] [ ] [ ] [ ] [ ] [ ] [ ]
2 [ X ] [ X ] [ ] [ ] [ ] [ ] [ ] [ ]
3 [ X ] [ X ] [ ] [ ] [ ] [ ] [ ] [ ]
4 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
5 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
6 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
7 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
8 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
9 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
10 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
11 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
12 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
13 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
14 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
15 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]
16 [ X ] [ X ] [ ] [ ] [ ] [ ] [ ] [ ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.