Technical data

Using the BayStack 350 Series 10/100 Autosense Switch
1-4
893-00992-D
Back-Panel Components
This section describes the back-panel components of the BayStack 350 switches
(Figure 1-3
).
• The console/service port for the Model 350F-HD and Model 350T-HD is
located on the front panel (see “
Front-Panel Components” on page 1-2).
• The console/service port for the Model 350F and Model 350T is located on
the back panel.
For a description of each numbered component, see Table 1-2
.
Figure 1-3. Back-panel components
Table 1-2. Back-panel components
Item Icon/Label Description
1 Manufacturing label: Lists the model number, serial number, MAC address, and
voltage rating.
2RS232
1
1
The console/service port for the Model 350F-HD, labeled Comm Port, is located on the front panel.
Console/service port DB-9 (RS-232-D) serial port connector: Allows the attachment
of a console terminal device for accessing the console interface (CI) screens.
3 AC power receptacle
2
: Accepts the AC power cord (supplied).
2
The AC power receptacle is mounted with the ground pin below on some early units. Later units are configured as
shown above. The receptacle is keyed and the AC power cord cannot be installed incorrectly.
7830EB
BayStack 350T
M/N AL2012A01
BayStack Model 350F/350T back panel
1
BayStack 350F-HD
M/N AL2012A01
BayStack Model 350F-HD/350T-HD back panel
1
3
3
RS232
2