Technical data

Using the BayStack 350 Series 10/100 Autosense Switch
D-2
893-00992-D
Status Enabled for all ports Port Configuration
Autonegotiation Enabled for all ports
1
Speed/Duplex 100Mbs/Half (when
Autonegotiation is Disabled)
Trunk Members blank field Trunk Configuration
STP Enabled
Trunk Mode Basic
Trunk Status Disabled
Traffic Type Rx and Tx Trunk Utilization
Monitoring Mode Disabled Port Mirroring Configuration
Monitor Port Zero-length string
Port X Zero-length string
Port Y Zero-length string
Address A 00-00-00-00-00-00
(no MAC address assigned)
Address B 00-00-00-00-00-00
(no MAC address assigned)
Packet Type Both Rate Limiting Configuration
Limit None
Port 1 Port Statistics
Console Port Speed 9600 Baud Console/Service Port Configuration
Console Password Not Required
Console Read-Only Password user
Console Read-Write Password secure
Participation Enabled Spanning Tree Port Configuration
Priority 128
Path Cost 10 or 100
(continued)
Table D-1. Factory default settings for the BayStack 350 switch (continued)
Field Default setting Appears in this CI screen