Technical data

Using the Console Interface
893-00992-D
3-61
Display Event Log
The Event Log screen (Figure 3-28) provides the following information:
• Software download: Indicates the new software version.
• Authentication failure: Indicates any attempted SNMP
get
or
set
access that
specified an invalid community string.
• TELNET session status: Indicates various TELNET events. (For details on
configuring this feature, see “
TELNET Configuration” on page 3-55.)
• Operational exception: Indicates that the microprocessor has received an
exception at the specified vector number.
Choose Display Event Log from the main menu to open the Event Log screen.
Figure 3-28. Event Log screen
Note:
This screen does not refresh dynamically to show new entries. To
refresh the screen, press [Ctrl]+P.
Event Log
Entry Number: 4 sysUpTime: 00:14:36 Reset Count: 2
Connection logout, IP address: 38.227.40.8, access mode: no security.
Entry Number: 3 sysUpTime: 00:13:35 Reset Count: 2
Connection logout, IP address: 38.227.40.8, access mode: no security.
Entry Number: 2 sysUpTime: 00:00:53 Reset Count: 2
Successful connection from IP address: 38.227.40.8, access mode: no security.
Entry Number: 1 sysUpTime: 00:00:00 Reset Count: 1
Software downloaded to BayStack Model 350T HW:RevC FW:V1.00 SW:V1.00.
Press Ctrl-P to see previous display. Press Ctrl-N to see more entries.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.