Technical data

Using the Console Interface
893-00992-D
3-31
Table 3-11 describes the Server Trunk Configuration screen fields.
Table 3-11. Server Trunk Configuration screen fields
Field Description
Trunk
Column header for the read-only fields in this screen. The read-only data displayed in
the Trunk column indicates the trunks (S1 to S4) that correspond to the switch ports
specified in the user-configurable Trunk Members fields.
Trunk Members
The Trunk Members column contains fields in each row that can be configured to create
the corresponding trunk. The combined trunks cannot exceed eight trunk members.
Each switch port can only be a member of a single trunk. The appropriate trunk number
for each trunk member configured within this field is shown adjacent to the
corresponding switch port in the following screens: Port Configuration screen, Spanning
Tree Configuration screen, and VLAN Configuration screen.
Default Value blank field
Range 1 to 26 (depending on model type)
Trunk Status
The Trunk Status column contains a single field for each row that allows users to enable
or disable any of the server trunks.
Default Value Disabled
Range Enabled, Disabled