Technical data

Using the BayStack 350 Series 10/100 Autosense Switch
3-26
893-00992-D
MultiLink Trunk Configuration
The MultiLink Trunk Configuration Menu screen (see Figure 3-12) allows you to
select the appropriate screen to configure up to four inter-switch trunks and four
server trunks. Any combination of each configuration type (inter-switch and
server trunk) can be used to configure up to 16 trunk members on each switch).
Bandwidth utilization can be monitored for the trunk member ports within each
trunk and trunk-type.
For more information about configuring MultiLink Trunks, see “MultiLink
Trunks” on page 1-22.
Choose MultiLink Trunk Configuration from the Switch Configuration Menu
screen to open the MultiLink Trunk Configuration Menu screen.
Figure 3-12. MultiLink Trunk Configuration Menu screen
Note:
When a trunk is not active (Trunk Status field set to Disabled),
configuration changes do not take effect until the Trunk Status field is set to
Enabled.
MultiLink Trunk Configuration Menu
Inter-Switch Trunk Configuration...
Server Trunk Configuration...
Trunk Utilization...
Return to Switch Configuration Menu
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.