Technical data

Using the Console Interface
893-00992-D
3-23
Port Configuration
The Port Configuration screen (see Figure 3-10 and Figure 3-11) allows you to
configure a specific switch port or all switch ports. You can set the switch ports to
autonegotiate for the highest available speed of the connected station, or you can
set the speed for selected switch ports.
Choose Port Configuration from the Switch Configuration Menu screen to open
the Port Configuration screen.
Figure 3-10. Model 350F-HD Port Configuration screen (1 of 2)
V1 to V8
Indicates the VLAN names for VLAN V1 to VLAN V8.
Default Value All ports configured in VLAN V1
Range Enabled [ x ], Disabled [ ]
1
MultiLink trunking is available for BayStack 350 Series switches using software release version V2.0 (or later). Earlier
version BayStack 350 Series switches do not display this field in the VLAN Configuration screens.
Table 3-7. VLAN Configuration screen fields (continued)
Field Description
Port Configuration
Port Trunk Status Link Auto Negotiation Speed Duplex
---- ----- ------------ ---- ---------------- -----------------
1 [ Enabled ] Up [ Enabled ] [ 100Mbs / Half ]
2 [ Enabled ] Up [ Enabled ] [ 100Mbs / Half ]
3 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
4 [ Enabled ] Down [ Disabled ] [ 100Mbs / Half ]
5 [ Enabled ] Up [ Enabled ] [ 10Mbs / Full ]
6 S1 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
7 S1 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
8 [ Enabled ] Up [ Enabled ] [ 10Mbs / Full ]
9 S1 [ Enabled ] Up [ Disabled ] [ 100Mbs / Full ]
10 [ Enabled ] Down [ Enabled ] [ 100Mbs / Full ]
11 [ Enabled ] Down [ Enabled ] [ 100Mbs / Full ]
12 [ Enabled ] Down [ Disabled ] [ 100Mbs / Half ]
More...
Press Ctrl-N to display choices for ports 13-26.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.