Technical data

Using the Console Interface
893-00992-D
3-9
IP Configuration
The IP Configuration screen (Figure 3-3) allows you to set or modify the
BayStack 350 switch IP configuration parameters. Data that you enter in the
user-configurable fields takes effect as soon as you press [Enter].
Choose IP Configuration from the main menu to open the IP Configuration
screen.
Figure 3-3. IP Configuration screen
Note:
The read-only fields in this screen are updated based on the BootP mode
specified in the BootP Request Mode field. (See “
Choosing a BootP Request
Mode” on page 3-11 for more information.)
IP Configuration
BootP Request Mode: [ BootP When Needed ]
Configurable In Use Last BootP
------------------- --------------- ---------------
In-Band IP Address: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
In-Band Subnet Mask: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
Default Gateway: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.