Technical data

Using the Console Interface
893-00992-D
3-7
Main Menu
This section describes the commands available from the CI main menu
(Figure 3-2
). The CI screens and submenus for these commands are described in
the following sections.
Figure 3-2. Console interface main menu
Table 3-1 describes the CI main menu commands.
Table 3-1. Console interface main menu commands
Command Description
IP Configuration...
Displays the IP Configuration screen (see “
IP Configuration” on page 3-9). This
screen allows you to set or modify IP configuration parameters.
SNMP Configuration...
Displays the SNMP Configuration screen (see “
SNMP Configuration” on
page 3-13
). This screen allows you to set or modify the SNMP read-only
community and read-write community strings, enable or disable the
authentication trap, set the IP address of trap receivers, and set the trap
community strings.
(continued)
BayStack Model 350T Main Menu
I
P Configuration...
SNM
P Configuration...
S
ystem Characteristics...
Sw
itch Configuration...
Console/Serv
ice Port Configuration...
Sp
anning Tree Configuration...
T
ELNET Configuration...
Sof
tware Download...
Display E
vent Log
R
eset
Reset to D
efault Settings
L
ogout
Use arrow keys to highlight option, press <Return> or <Enter> to select option.