Instruction manual

893-839-C B-3
Attaching the DC Input Ground Wire
Required tools: Crimping tool and flat-tip screwdriver
1. Insert 6-gauge grounding cable into the ter-
minal and crimp tightly.
2. Screw the terminal into the ground lug
attachment hole on the back panel of the hub
using a #10-32× 1/2 screw.
7067
6 gauge wire
70
6
Redundant
Power
+
–
3. Attach the grounding cable to the system or
rack ground for your DC input to the hub.
Redundant
Power
+
–
To DC power ground
7069
893-839-CBook Page 3 Thursday, December 12, 1996 4:18 PM