Instruction manual

Interconnecting Your Stack
893-839-C 2-9
Figure 2-6. Default position of the Segment Select switch is segment 1
The Segment Select switch can be set in the following ways:
• To isolate the hub (Isol), set both switches down.
• To set to segment 1, set the left switch down and the right switch up.
• To set to segment 2, set the left switch up and the right switch down.
• To set to segment 3, set both switches up.
Extending Management to Remote Cascades
You can use an installed NMM to manage multiple cascades in a stack.
management extension ports extend the range of a managed stack to a
cumulative total distance of 100 meters (see F
igure 2-7).
Figure 2-7. Stack cascades joined by management extension cable
Segment Select
Isol 1 2 3
5880
5881.2
100 meters
40 meters 60 meters
893-839-CBook Page 9 Thursday, December 12, 1996 4:18 PM