Instruction manual

Installing a BayStack Hub
893-839-C 2-3
Figure 2-1. Forward and rear rack mount bracket positions
Insert the flat-head screws provided with the mounting brackets through
each bracket and into the mounting holes in the hub, as shown in step 1 of
F
igure 2-2, and tighten the screws.
Figure 2-2. Installing the 100-series hub in an equipment rack
2. Attach the hub to the equipment rack.
Insert two screws with washers appropriate to your equipment through
each bracket and into the rack, as shown in step 2 of F
igure 2-2, and
tighten the screws.
3. Proceed to “
Completing the Installation” on page 5 to finish this
installation procedure.
5848.1
5871.1
Step 1
Step 2
893-839-CBook Page 3 Thursday, December 12, 1996 4:18 PM