Instruction manual

Quick Reference Information
1-2 893-839-C
List of Features
BayStack 100-series hubs have the following features:
• 10 Mb/s Ethernet ports with the following connector options:
– RJ-45 10BASE-T (12- and 24-port options)
• An MDI-X/MDI button on the RJ-45 hubs allows you to connect
two hubs without using a crossover cable.
– Telco 10BASE-T (24 ports)
– Straight-tip (ST) 10BASE-FL (6 ports)
• The 10BASE-FL standard permits you to use fiber optic cables up
to 2000 meters long.
• Two media adapter slots to provide two additional ports per hub with
optional 10BASE-T, attachment unit interface (AUI), 10BASE-2 thin
coaxial, or fiber media adapters
• Stacking capability for up to 10 hubs and 260 ports
– Automatic stack position resolution eliminates the need for manual
switch setting to indicate hub position in a stack
• Three Ethernet single-repeater cascade segments with isolate capability:
– Assign hub ports to segments 1, 2, 3, or isolate through network
management software or Segment Select switch
– Parallel repeater technology designates all the hubs in a cascade that
are assigned to the same segment to function as one repeater
• AC or
− 48 V DC power supply option for 12- and 24-port RJ-45 hubs
• A full range of management functionality:
– Simple Network Management Protocol (SNMP) management via one
of three optional NMMs:
• The BayStack 100-series Standard Network Management Module
(Standard NMM) provides Expanded View
™
statistics for all of the
segments in the stack.
893-839-CBook Page 2 Thursday, December 12, 1996 4:18 PM