Instruction manual
Using the BayStack Model 350T 10/100 Autosense Switch
3-26 893-00992-A
Port Configuration
The Port Configuration screen (see Figure 3-13) allows you to selectively
configure individual switch ports or all switch port parameters. You can set your
switch ports to autonegotiate for the highest available speed of the connected
station, or you can choose a set speed for selected ports.
Figure 3-13. Port Configuration screen
Note: If you are having connectivity problems, and you suspect that the link
partner is not autonegotiating properly, use the Port Configuration screen to
manually select a specific operating mode (refer to the Speed/Duplex field
description).
Port Configuration
Port Status Link Auto Negotiation Speed Duplex
---- ------------ ---- ---------------- -----------------
1 [ Enabled ] Down [ Disabled ] [ 100Mbs / Full ]
2 [ Enabled ] Down [ Disabled ] [ 10Mbs / Half ]
3 [ Enabled ] Down [ Disabled ] [ 10Mbs / Half ]
4 [ Enabled ] Down [ Disabled ] [ 10Mbs / Full ]
5 [ Enabled ] Down [ Disabled ] [ 10Mbs / Full ]
6 [ Enabled ] Down [ Disabled ] [ 100Mbs / Full ]
7 [ Enabled ] Down [ Disabled ] [ 100Mbs / Full ]
8 [ Enabled ] Down [ Disabled ] [ 100Mbs / Full ]
9 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
10 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
11 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
12 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
13 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
14 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
15 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
16 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
All [ Enabled ] [ Disabled ] [ 100Mbs / Full ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
BOOK.MKR Page 26 Tuesday, March 4, 1997 7:24 PM