Instruction manual

Using the BayStack Model 350T 10/100 Autosense Switch
3-18 893-00992-A
The Switch Configuration Menu includes the commands listed in Table 3-5.
Table 3-5. Switch Configuration Menu commands
Command Description
MAC Address Table... Displays the MAC Address Table screen (see “MAC Address Table” on
page
3-19). You can use this screen to view MAC addresses that were learned
by the switch.
VLAN Configuration... Displays the VLAN Configuration screen (see “VLAN Configuration” on
page
3-20). You can use this screen to set up virtual LAN workgroups.
Port Configuration... Displays the Port configuration screen (see “
Port Configuration” on page 3-26).
The Port Configuration screen allows you to selectively configure individual
switch ports or all switch port parameters.
Clear Port Statistics Displays the Clear Port Statistics screen (see “
Clear Port Statistics on
page
3-31). The Clear Port Statistics screen allows you to reset accumulated
counters for a specific port or for all switch ports.
Display Port Statistics Displays the Port Statistics screen (see “Port Statistics” on page 3-28). The Port
Statistics screen allows you to view detailed information related to any switch
port.
Return to Main Menu This command exits the Switch Configuration Menu and displays the Main
Menu.
BOOK.MKR Page 18 Tuesday, March 4, 1997 7:24 PM