Instruction manual

Using the BayStack Model 350T 10/100 Autosense Switch
3-16 893-00992-A
The System Characteristics screen includes the fields listed in Table 3-4.
Table 3-4. System Characteristics screen fields
Field Description
MAC Address: The MAC address of the BayStack 350T switch.
Reset Count: Read-only field—indicates the number of resets since the BayStack 350T switch was
originally loaded with operational firmware.
Default Value: 1
Range: From 0 to 2
32
–1
Last Reset Type: Read-only field—indicates the type of reset last initiated.
Default Value: Power Cycle
Range: Power Cycle, Software Download, Management Reset,
Management Factory Reset
sysDescr: Read-only field that specifies the hardware and software version.
sysObjectID: Read-only field that provides a unique identification of the device, containing the
vendor’s private enterprise number.
sysUpTime: Read-only field that shows the operational length of time since the last reset. Note:
This field is updated when the screen is redisplayed.
sysServices: Read-only field indicating device physical and data link layer functionality.
sysContact: The name and phone number of the person responsible for the switch.
Default Value: Zero-length string
Range: Can be any ASCII string up to 56 printable characters
sysName: Any name that provides the switch with a unique identification.
Default Value: Zero-length string
Range: Can be any ASCII string up to 56 printable characters
sysLocation: The physical location of the switch.
Default Value: Zero-length string
Range: Can be any ASCII string up to 56 printable characters
BOOK.MKR Page 16 Tuesday, March 4, 1997 7:24 PM