Instruction manual

Using the BayStack Model 350T 10/100 Autosense Switch
3-14 893-00992-A
The SNMP Configuration screen includes the fields listed in Table 3-3.
Table 3-3. SNMP Configuration screen fields
Field Description
Read-Only
Community String:
The community string used for in-band read-only SNMP operations.
Default Value: public
Range: Can be any ASCII string up to 32 printable characters
Read-Write
Community String:
The community string used for in-band read-write SNMP operations.
Default Value: private
Range: Can be any ASCII string up to 32 printable characters
Trap #1 IP Address: Number one of four allowed Trap IP Addresses. Successive Trap Address
fields are numbered #2, #3, and #4. Each of the Trap addresses has an
associated Community String (see next field description).
Default Value: 0.0.0.0 (no IP address assigned)
Range: Four-octet decimal IP address notation, where each
octet of the address is represented as a decimal value,
separated by a decimal point
Community String: The community string associated with one of the four allowed trap
addresses (see Trap #1 IP Address field description).
Default Value: Zero-length string
Range: Can be any ASCII string up to 32 printable characters
Authentication Trap: Enables or disables sending a trap on an SNMP authentication failure.
Default Value: Enabled
Range: Enabled, Disabled
BOOK.MKR Page 14 Tuesday, March 4, 1997 7:24 PM