Manualshelf

Instruction manual

ManualsBrandsBay Networks ManualsComputer equipmentCM 100
61626364656667686970
Using the BayStack Model 350T 10/100 Autosense Switch
3-8 893-00992-A
IP Configuration
The IP Configuration screen (see Figure 3-3) allows you to set or modify the
BayStack 350T switch IP configuration parameters. Data entered into the
configurable fields of the screen display take effect as soon as the user presses
[Enter].
Figure 3-3. IP Configuration screen
Note: The read-only fields in this screen are updated depending on the BootP
mode selected in the BootP Request Mode: field (see “
Choosing a BootP
Request Mode” in this section for more information).
IP Configuration
BootP Request Mode: [ BootP When Needed ]
Configurable In Use Last BootP
------------------- --------------- ---------------
In-Band IP Address: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
In-Band Subnet Mask: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
Default Gateway: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
BOOK.MKR Page 8 Tuesday, March 4, 1997 7:24 PM