Instruction manual

Using the BayStack Model 350T 10/100 Autosense Switch
3-6 893-00992-A
Figure 3-2. CI Main Menu
The CI Main Menu includes the commands listed in Table 3-1.
Table 3-1. CI Main Menu commands
Command Description
IP Configuration... Displays the IP Configuration screen (see “IP Configuration” on
page
3-8). The IP Configuration screen allows you to set or modify IP
configuration parameters.
SNMP Configuration... Displays the SNMP Configuration screen (see “SNMP Configuration” on
page
3-13). This screen allows you to set or modify the SNMP read-only
community and read-write community strings, to enable or disable the
authentication trap, to set the IP address of trap receivers, and to set the
trap community strings.
System Characteristics... Displays the System Characteristics screen (see “
System
Characteristics” on page 3-15). This screen allows you to view switch
characteristics such as the number of resets and the hardware and
firmware version. This screen also contains three user-configurable
fields: sysContact, sysName, and sysLocation.
BayStack Model 350T Main Menu
I
P Configuration...
SNM
P Configuration...
S
ystem Characteristics...
Sw
itch Configuration...
Serv
ice Port Configuration...
Sp
anning Tree Configuration...
T
ELNET Configuration...
Sof
tware Download...
Display E
vent Log
R
eset
Reset to D
efault Settings
L
ogout
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
BOOK.MKR Page 6 Tuesday, March 4, 1997 7:24 PM