Instruction manual

Using the BayStack Model 350T 10/100 Autosense Switch

3-4 893-00992-A

Using the CI Menus

The CI menus and screens provide commands that allow you to conﬁgure and

manage the BayStack 350T switch.

Although some commands carry out actions immediately, other commands are

followed by an ellipsis (for example, IP Conﬁguration...) indicating that the

selection displays a submenu with other options.

Some commands can switch between several possible settings; these commands

toggle a condition. Other commands allow you to enter information; these

commands set or modify a parameter.

Navigating the CI Menus

Use the following methods to navigate the CI menus:

• To select a command:

— Use the arrow keys to highlight the command name.

— Press [Enter].

Alternatively, you can press the key corresponding to the underlined letter in

the command name. For example, to select the Sw

itch Conﬁguration

command in the Main Menu, press the [W] key. Note that the text characters

are not case sensitive.

• To toggle between several possible settings:

— Use the Space bar to highlight the setting.

— Press [Enter].

• To clear a string ﬁeld:

— Place the cursor in the string ﬁeld.

— Press [Ctrl]+K.

• To return to the previous menu, press [Ctrl]+R.

• To return to the Main Menu at any time, press [Ctrl]+C.

BOOK.MKR Page 4 Tuesday, March 4, 1997 7:24 PM