Instruction manual

Installation
893-00992-A 2-9
Wall Mounting the Switch
To install the BayStack 350T switch onto a wall, follow these steps:
1. Using a Phillips (or cross-head) screwdriver, attach the two mounting
brackets to both sides of the switch with the four screws supplied with the
unit (see Figur
e 2-2).
2. Insert two screws (not supplied) through each of the mounting brackets
and tighten the screws (see Figur
e 2-4).
3. Proceed to “Connecting Port Cables” on page 2-11 to connect the
network cables.
Figure 2-4. Attaching a BayStack 350T switch to a wall
310T
587FA
BOOK.MKR Page 9 Tuesday, March 4, 1997 7:24 PM