Instruction manual

Installation
893-00992-A 2-7
Tabletop or Shelf Installation
To install the BayStack 350T switch onto a tabletop or shelf, follow these steps:
1. Attach four rubber footpads onto the bottom of the unit, at each corner
(see Figur
e 2-3).
2. Place the switch onto the tabletop or shelf with the front panel facing
toward you. Be sure to leave adequate space around the unit for
ventilation and access to the cables.
3. If you are securing the switch to the tabletop or shelf, insert two screws
(not supplied) through each of the mounting brackets and tighten the
screws.
4. Proceed to “Connecting Port Cables” on page 2-11 to connect the
network cables.
Figure 2-3. Attaching rubber footpads
586FA
310T
BOOK.MKR Page 7 Tuesday, March 4, 1997 7:24 PM