Instruction manual

Index
893-00992-A Index-5
S
safety alert messages xxi
serial port connector
1-3
server
BootP
2-4
TFTP
2-4
service port
requirements for
3-2
using to manage switch
1-13
Service Port Configuration command
3-7
Service Port Configuration screen
3-32
service port connector
illustration
B-5
pin assignments
B-5
Service Port Data Bits field
3-33
Service Port Parity field
3-33
Service Port Stop Bits field
3-33
service port, connecting to
3-3
settings, default
C-1
Simple Network Management Protocol. See
SNMP
Single Collisions field
3-30
site preparation
2-3
SNMP
MIB support
1-4, 1-6
traps
1-6, 1-14
using to manage switch
1-6
SNMP Configuration command
3-6
SNMP Configuration screen
3-13
software
download process
3-45
image upgrades
1-6
requirements
2-4
Software Download command
3-7
Software Download screen
3-44
Spanning Tree Configuration command
3-7
Spanning Tree Configuration Menu
3-34
Spanning Tree Port Configuration field
3-35
Spanning Tree Port Configuration screen
3-36
Spanning Tree Protocol, compliance s
tandards
1-4
Spanning Tree Switch Settings screen
3-38
Speed/Duplex field
3-27
Start TFTP Load of New Image field
3-45
State field
3-37
Status field
3-27
Switch Configuration command
3-7
Switch Configuration Menu (table)
3-18
Switch Configuration Menu screen
3-17
sysContact field
3-16
sysDescr field
3-16
sysLocation field
3-16
sysName field
3-16
sysObjectID field
3-16
sysServices field
3-16
System Characteristics command
3-6
System Characteristics screen
3-15
sysUpTime field
3-16
BOOK.MKR Page 5 Tuesday, March 4, 1997 7:24 PM