Instruction manual

893-00992-A C-1
Appendix C
Switch Default Settings
This appendix lists the factory default settings for the BayStack 350T switch
(see T
able C-1).
Table C-1. Factory default settings for the BayStack 350T switch
Field Default Setting Used in CI Screen:
BootP Request Mode: BootP When Needed IP Configuration
In-Band IP Address: 0.0.0.0 (no IP address assigned)
In-Band Subnet Mask: 0.0.0.0 (no subnet mask assigned)
Default Gateway: 0.0.0.0 (no IP address assigned)
Read-Only Community String: public SNMP Configuration
Read-Write Community String: private
Trap IP Address: 0.0.0.0 (no IP address assigned)
Community String: Zero-length string
Authentication Trap: Enabled
sysContact: Zero-length string System Characteristics
sysName: Zero-length string
sysLocation: Zero-length string
Aging Time: 300 seconds MAC Address Table
Find an Address: 00-00-00-00-00-00
(no MAC address assigned)
V1 through V8 All ports configured in VLAN V1 VLAN Configuration
Status Enabled for all ports Port Configuration
Auto Negotiation Enabled for all ports
Port: 1 Port Statistics
BOOK.MKR Page 1 Tuesday, March 4, 1997 7:24 PM