Instruction manual

893-00992-A B-1
Appendix B
Connectors and Pin Assignments
This appendix describes the BayStack Model 350T 10/100 Autosense Switch port
connectors.
RJ-45 (10BASE-T/100BASE-TX Port) Connector
The RJ-45 port connectors (see Figure B-1) are wired as MDI-X ports to connect
end stations without using crossover cables. (Refer to “
MDI and MDI-X Devices”
on page
B-2 for information about MDI-X ports.) For 10BASE-T connections,
use Category 3 or better UTP cable. For 100BASE-TX connections, use only
Category 5 UTP cable.
Figure B-1. RJ-45 (8-pin modular) port connector
18
616EA
BOOK.MKR Page 1 Tuesday, March 4, 1997 7:24 PM