Instruction manual

Using the Console Interface
893-00992-A 3-49
Reset
The Reset command allows you to reset the switch, without erasing any
configured switch parameters.
Resetting the switch takes approximately 5 seconds to complete. During this time
period, the switch initiates a self-test that comprises various diagnostic routines
and subtests.
The results of the self-test are displayed briefly in the BayStack 350T Self-Test
screen (see Figure
3-25), followed immediately by the CI screens.
Figure 3-25. Reset command self-test result screen example
The switch LEDs also display various patterns that indicate subtests are in
progress.
Note: The BayStack 350T Self-Test screen remains displayed only if the
self-test detects a fatal error.
BayStack Model 350T Self-Test
ASIC addressing test ... Pass
ASIC buffer RAM test ... Pass
Physical layer test ... Pass
Port internal loopback test ... Pass
Self-test complete.
BOOK.MKR Page 49 Tuesday, March 4, 1997 7:24 PM