User guide

Running bom_upload
PCN Process User Guide (301945-A)
Generating PCNs and Uploading BOMs: 6-7
Getting the PCN Number
To obtain a PCN number and request a BOM upload:
1.
Change to your working directory containing the .profile file that was
created when you ran
bn_bomprocess
.
2.
Run /bay
dir
/dra/utils/docmgr or bnw_docmgr and select the option:
6). Run BOM Upload
3.
Choose the following option when the Upload Requester appears:
1). Request a BOM Upload
4.
Select your project by entering its name and confirming it, or by listing
all the projects and entering its number.
The utility will display the part number of the BOM that you want uploaded.
5.
If the part is already known to report to a particular parent, the utility
continues with Step 6. Otherwise it asks you to enter a parent that this
part reports to, for example:
Enter a part 301949-A reports to, OR hit return when done:
In this case:
a.
Enter the part that your part reports to, or, if more than one part,
each of them, one at a time.
If this is the top-level part, just re-enter the part number, e.g., 301949-A.
See
Structuring a BOM
on page 5-4.
b.
Confirm that you chose the correct parent assembly number:
Using 301949-A -- <Part Description> as parent assy number.
Is this OK? [y/n] [y]:
y
If you’re asked if you want to roll the rev of the parent, in general, say
“No.” You should only answer “Yes” to this question if your PCB is a
0-MB PCB reporting to multiple-MB kits (8-MB, 16, 32, etc.) that we
purchase in kit form from a supplier. This is to ensure that the 0-MB
board and all of the kits are at the same revision level.
6.
Read the path and filenames for the .sap, _proto.diff, and _changes.rev
files that the utility is using for input.
Caution:
If these are not correct, cancel out of the script.