User guide

Overview
PCN Process User Guide (301945-A)
Creating and Updating BOMs: 5-3
• Running
bn_bomprocess
• Eventually running
bom_upload
(see Chapter 6), which causes the files
related to
bom_upload
to be moved into a post-release area under
/bay
dir
/
dra/rel
and owned by
root
The
bn_bomprocess
script generates a number of files in one or more of the
following directories:
• Your working directory
• The directory you specify in the configuration file for
bn_bomprocess
(see
The Configuration File
on page 5-16)
•
/bay
dir
/dra/common/
assembly
if you run
bn_bomprocess
indirectly via
mechbom
Note:
/dra/common
is not an absolute requirement for
mechbom
. But you can put files there, and
they will be kept for at least 20 days and will not be deleted without warning.
The following table summarizes the directories used for input by
bn_bomprocess
,
mechbom
, and
xcelbom
. Note that there are separate
/bay
dir
/
dra
directory trees, one for
/bayeast/dra
, and one for
/baywest/dra
(nominally
directories on the East Coast system
caps
and the West Coast system
supremes
).
Table 5-1. Input directories for Creating a BOM
Dir
ectories Contents
~
your_ project_directory
Schematic file. Input config, include,
change, and depop files. Generated files.
Run
bn_bomprocess
and
xcelbom
from here.
/bay
dir
/dra/common/
assembly
For
mechbom
, an input
assembly
.saplis
file obtained from SAP. Run
mechbom
from here.
/bay
dir
/dra/2brel/docs/
component.nn
Documentation files to support the part.
You need to supply these files.
/bay
dir
/dra/2brel/mech/
component.nn
For
mechbom
, data files to support rev
for a component within a mechanical
BOM. You need to supply these files.
/bay
dir
/dra/2brel/programs/
component.nn
Input software (device) files to support
the part. You need to supply these files.