User guide

Doc Data
4-10: Putting Data on EDA Servers
4.
Issue a PCN to update the BOM with the new drawing revision. (See
Chapter 6.)
This allows the EDA process to move the file(s) from the
/bay
dir
/dra/2brel/
mech
area to the
/bay
dir
/dra/rel/mech
area, and to place them in the EDA
Electronic Print Room.
Doc Data
You should supply the following types of documents for a PCN:
• Rework instructions
• Board modification histories
• Specifications
• Other instructions, procedures, etc.
To supply documentation for a PCN:
1.
Place all documentation, specifications, rework instructions, etc., in the /
bay
dir
/dra/2brel/docs/
component.nn
directory. Store the original and a
PostScript file in this directory.
For example:
/dra/2brel/docs/115519-A.00/115519-A.doc
/dra/2brel/docs/115519-A.00/115519-A.ps
Note:
In place of the
.ps
file, Adobe Acrobat .
pdf
files are okay, too, as you may want to generate
them to make sure the output is good.
2.
Issue a PCN to update the BOM and move the files to /bay
dir
/dra/rel. (See
Chapter 6.)
When a PCN is generated, the new revision is updated in SAP, the .
pdf
file is
created, the Electronic Print Room is updated, and the files are moved to the
release area, for example:
/dra/rel/docs/115000/115519-A.00/115519-A.doc
/dra/rel/docs/115000/115519-A.00/115519-A.ps