User guide

Data Storage for Programmed Parts
4-4: Putting Data on EDA Servers
Providing Device Files for PALs
To provide device files for PALs:
1.
Create a directory
part_no.nn
in the /bay
dir
/dra/2brel/programs
directory.
The directory, e.g., 305299-A.00, must include the minor revision number.
2.
In this directory, put the .
jed
and
.abl
or other files used to program the
part.
Use the part number as the root, for example, producing files named
305299.jed
or
305299.abl
. No checksums are needed.
Note:
On the West Coast, any other files not in the table
Object Types for Programmable Parts
on
page 4-3 are moved from the directory to
/source
and processed manually. On both coasts, any
other files in the directory not in the table will be discarded.
119 .obj No
119 .pof Yes Altera
119 .rom Yes Binary
119 .s No Motorola S Record
119 .s2 No
119 .s3 No
119 .ss No
119 .svf No Serial vector file
119 .sym
* The .i file is used to program flash SIMMs (designated by the 930 class code) in a mass production
environment. You should also submit a .bin file to be used with Speedview Windows to load the
image as part of a test process.
Table 4-1. Object Types for Programmable Parts
Class Code
Object Code
Extension
Extractable
Checksum
File Type