User guide

Part Number Availability
3-10: Using and Getting Part Numbers
Printing Part Requests
You can print a part request provided that the Part Manager has been used to
request the part.
To print or display information about a part request:
1.
Run /bay
dir
/dra/utils/docmgr or bnw_docmgr and select the option:
1). Run PARTMGR (Part Management)
2.
Choose the following option when the Part Manager appears:
5). Print a Part Request
3.
Enter the part number to be displayed.
4.
Specify whether to print the information or display it to the screen.
Note:
To print, choose a printer from the list displayed by the Part Manager.
Part Number Availability
SAP and Timing Issues
As described in
Beginning a New Project
on page B-1:
• Email about a new or canceled part number is sent to an EDA support
coordinator, who uses it to enter the number into the SAP database.
• You will not see the change until the part is entered into SAP and the SAP
database is downloaded at its regular (bi-hourly) time.
Viewlogic Library and Timing Issues
The new part will not be in the Viewlogic symbol library until a symbol has been
created for it by the symbol librarian, who will receive email notification of the
need for a new symbol if you answer “y” to the Part Manager’s question, “Do you
need a symbol for this part?”