User guide

Using Recognized Parts
1-4: Getting Started (An Overview)
Using Recognized Parts
If you’re adding parts to a schematic, they come from Viewlogic libraries. Each
part has an associated symbol and a Bay Networks part number.
To find parts:
1.
See your application for help on specifying parts within it. (There is a
small note about finding parts
In ViewLogic
on page 3-1.)
2.
See
Part Numbers
on page E-1 for a description of the Bay Networks
common part number, legacy numbers, etc.
The common part number is something like 300123-A.
3.
See
Finding Parts
on page 3-1 for help on finding part information such as
approved vendor, lead-time, etc., using such UNIX utilities as /bayeast/
dra/utils/partmgr, /baywest/dra/utils/bnw_partmgr, or others—refer to
Appendix A.
4.
See
On the Web
on page 3-3 for help finding part information on the EDA
web pages.
5.
Add or modify files for the EDA data storage areas as outlined in
Using
EDA Data Servers
on page 1-6, below, or refer to Chapter 4.
6.
If you need to add, delete, or change parts on a BOM, see
Creating and
Updating BOMs
on page 1-7, below, or refer to Chapter 5.