User guide

Part Numbers
E-4: Parts and Part Numbers
Searching for and Revving Legacy Part Numbers
You can still get the next embedded rev of an old-style part, as long as the part is
in SAP.
When you search for a part number, you may notice these variations, as shown in
the following table.
When you use
partmgr
to rev a legacy number from the West Coast, i.e., from the
Synopsis parts, you need to:
• Use the
/baywest/dra/utils/bnw_partmgr
as the one on
/bayeast/dra/utils/
partmgr
does not recognize those part numbers
• Specify the component of the part number to be revved, as requested by the
partmgr
.
Tabbed Part Numbers
You can use tabbed part numbers to assign a single part number to a group of
several types of parts. The tabbed part number is represented by a part number
suffix in the form:
-
nn
where the two digits specify a collection or table of parts, such as screws.
Table E-2. Other Numbering Formats
Part Number Root Number to Use in partmgr
900-00099-A 900-00099
900-055-A 900-055
920-00636-E 920-00636
920-471-C 920-471
960-00484-A 960-00484
300267-A-06 300267 (tabbed parts are not handled by
partmgr
but by manual request)
650-123-6.0 650-123
650-123456-6.0 650-123456
920-12345-B-C 920-12345