User guide

bom_upload Error Messages
PCN Process User Guide (301945-A)
Error Messages: D-7
Part <part number> appears to be a top level assembly.
The
bom_upload
script reports that the first entry of the .
sap
file is a
top-level number, and it gives you the choice of continuing.
Part to upload this BOM against not found in profile file. Please
contact Mike Shannon.
If
bom_upload
cannot determine from the
.
profile
file which BOM to
upload, it cannot continue. Contact Mike Shannon or EDA.
Please enter a rev greater than <where-used part>.
For the parent part, you must enter a minor rev greater than the current rev.
Please log on to an east coast machine (caps) until this is set up
to be run on the west coast.
This script is set up to run from the East Coast machines.
Sorry, you are not authorized to perform this function!
Only specified users may run Option 2 of
bom_upload
. This is mainly
reserved for EDA.
Sorry, you cannot change <where-used part> to a released rev.
You can’t change the rev of the parent part to a released rev.
The letters I, O, Q, and X are NOT allowed in revs.
These letters are not allowed in minor revs of the part numbers.
Top level assembly <parent> found in the .sap file! Remove top
level assembly from the BOM!
The parent assembly is not allowed in the .
sap
file.
Unable to find <project> in prod_list.proto.txt. Contact
Engineering Services.
The project you selected is not found in the list that maps projects to PCN
numbers.
Unable to find <project> in upldr_list.proto. Contact Engineering
Services.
The project you selected is not found in the list that maps projects to
uploaders.
Unable to find <where-used part> in data dump, exiting.
If the part you selected as the parent part is not found in the SAP data dump,
the program exits.