User guide

bn_bomprocess Messages
D-2: Error Messages
Class Code <input_class_code> not found on this class code list.
You entered a non-existent class code.
Contact Engineering Services immediately! Part number log file may
be corrupt.
The part log is corrupt.
Option 4 is not implemented in east.
The
wfps
script that runs when you select Option 1 and then Option 4 in the
partmgr
is not implemented in Bay East.
Option 6 is not implemented in west.
The
getpart
script that runs when you select Option 1 and then Option 6 in
the
partmgr
is not implemented in Bay West.
Part number log file is of zero length. May be corrupt! Contact
Engineering Services immediately.
The part log has no content.
Unable to find a project containing the string <name_entered>.
You entered a string name for the project, but the string does not match
anything in the project list.
Unable to find class code <input_doc_only_code> for non-doc parts.
You selected either off-the-shelf or custom-made and then selected a
documentation-only class code.
bn_bomprocess Messages
You may run into only a few of the error messages that the
bn_bomprocess
script can report. There are many other messages than listed here, but we assume
that you will understand them if you see them.
Errors
The error messages in this section are all preceded by the words “severe error”
when they’re displayed by
bn_bomprocess
.
<filename> file required but not specified - EXITING
The
bn_bomprocess
requires this file, but it isn’t specified in the
configuration file that you’re using.