Technical data

Using Operating Commands

303561-A Rev 00

3-29

Displaying the ATM ARP Table for an Interface

You can display the ATM ARP tables for a specific IP interface address by

entering the

atmarp

command during a Technician Interface session. The

command has the following syntax and options:

atmarp table

[

]

<IP_address>

is the address of an IP interface on the ATM ARP client or server.

Examples (server):

[2:1]$

atmarp table -r 128.185.97.73

IP address Life ATM address Vpi.vci

------------- ----- ----------------------------------------------

128.185.97.74 423 39000000000000000000000000.0000a20d74aa01 0.63

[2:1]$

atmarp table -l 128.185.97.73

IP Address State Encaps Lifetime Retries

--------------- --------- --------- -------- --------

128.185.97.74 Resolved Default 410 0

Option Flag Purpose

-a Displays the ATM address for the

<IP_address>

you enter in the

command line

-r Displays the resolution table for the

<IP_address>

you enter in the

command line

-v Displays the virtual circuit (VC) table for the

<IP_address>

you enter in

the command line

-l Displays all (-r, -v, and -a) tables for the

<IP_address>

you enter in the

command line