Technical data

Using Technician Interface Software
2-18
303561-A Rev 00
Parameter: Maximum Autosaved Files
Attribute Name: wfSerialPortAutoSaveNumFiles
Attribute Number: 33
Default: 0 (log autosave off)
Options: 1 to 99
Function: Specifies the number of times the system saves the events log to a new file
automatically when the log is full. The system saves the log the maximum
number of times you specify, or until the memory card or diskette drive on
the router becomes full.
Instructions: Accept the default value (0, disabled) or specify the number of times you
want to save the log to a new file.
Command:
set wfSerialPortEntry.33. <port_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.33
Parameter: Autosave Volume
Attribute Name: wfSerialPortAutoSaveVolume
Attribute Number: 34
Default: None
Options: Any valid memory card volume (slot) number from 1 to 14, or the diskette
drive designation,
-a
Function: Specifies the target volume where the system stores new log files saved
through the log autosave feature.
Instructions: Specify the memory card or diskette file system volume on which you
want to save the events log through the log autosave feature.
Command:
set wfSerialPortEntry.34. <port_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.34