Technical data

Configuring the Console Port
303561-A Rev 00
2-17
Parameter: Force User Logout
Attribute Name: wfSerialPortUserAbortLogoutDisable
Attribute Number: 31
Default: 2 (Disable)
Options: 1 (Enable)
|
2 (Disable)
Function: Specifies whether or not the user can execute a Control-c (^C) to break
out of a user autoscript at login (when a user autoscript is in effect).
Instructions: Set the parameter to Enable to prevent the user from using ^C to break out
of the user autoscript at login.
Set the parameter to Disable to allow the user to execute ^C to break out
of the user autoscript at login.
Use the default (Disable) if you want users to access the Technician
Interface. Set to Enable if you want to force users to enter the Telnet
logout
command.
Command:
set wfSerialPortEntry.31. <port_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.31
Parameter: History Depth
Attribute Name: wfSerialPortHistoryDepth
Attribute Number: 32
Default: 20
Options: 1 to 40 (commands)
Function: Specifies the maximum number of Technician Interface commands stored
in the local command history table. The table stores each command you
enter at the Technician Interface prompt on a first in first out (FIFO) basis.
Instructions: Set the maximum number of commands that you want the router to
remember, for subsequent recall via the Technician Interface
history
command.
Command:
set wfSerialPortHistoryDepth.32. <port_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.32