Technical data

Configuring the Console Port
303561-A Rev 00
2-13
Parameter: Login Timeout
Attribute Name: wfSerialPortLoginTimeOut
Attribute Number: 16
Default: 1 min
Options: 1 to 99 min (99 indicates infinity)
Function: Specifies the number of minutes the Technician Interface waits to time out
when no one has pressed the enter key after the Login prompt. This
parameter is valid only when Modem Enable is set to 1 (Enable). The
Technician Interface hangs up the phone when the timeout value is
exceeded.
Instructions: Accept the default (1 minute) or specify a different timeout value.
Command:
set wfSerialPortEntry.16. <port_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.16
Parameter: Password Timeout
Attribute Name: wfSerialPortPasswordTimeOut
Attribute Number: 17
Default: 1 min
Options: 1 to 99 min (99 indicates infinity)
Function: Specifies the number of minutes the Technician Interface waits to time out
when no one has pressed the enter key after the Password prompt. This
parameter is valid only when Modem Enable is set to 1 (Enable). The
Technician Interface returns to the Login prompt when the timeout value
is exceeded.
Instructions: Accept the default value (1 minute) or specify a different timeout value.
Command:
set wfSerialPortEntry.17. <port_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.17