Technical data

Configuring the Console Port
303561-A Rev 00
2-11
Parameter: Modem Enable
Attribute Name: wfSerialPortModemEnable
Attribute Number: 12
Default: 2 (Disable)
Options: 1 (Enable)
|
2 (Disable)
Function: Specifies whether the terminal connects directly or via a modem to the
Technician Interface.
Instructions: Use the 1 (Enable) setting to configure the terminal for connection via a
modem to the Technician Interface. Use the 2 (Disable) setting to
configure the terminal for connection directly to the Technician Interface.
Command:
set wfSerialPortEntry.12. <port_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.12
Parameter: Lines Per Screen
Attribute Name: wfSerialPortLinesPerScreen
Attribute Number: 13
Default: 24 lines
Options: 1 to 512 lines
Function: Specifies the maximum number of lines displayed on the console screen
before the system displays the More prompt. The screen may override the
number of lines you specify if Telnet can negotiate the window size with
the remote client.
Instructions: Set according to your console requirements.
Command:
set wfSerialPortEntry.13. <port_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.13