Technical data

Using Technician Interface Software
2-10
303561-A Rev 00
Parameter: Port Parity
Attribute Name: wfSerialPortParity
Attribute Number: 10
Default: 1 (None)
Options: 1 (None)
|
2 (Odd)
|
3 (Even)
Function: Enables or disables data error detection for each character transmitted or
received.
Instructions: Use the 2 (Odd) or 3 (Even) setting to enable data error detection. Use the
1 (None) setting to disable data error detection.
Command:
set wfSerialPortEntry.10. <port_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.10
Parameter: Stop Bits
Attribute Name: wfSerialPortStopBits
Attribute Number: 11
Default: 1 (1)
Options: 1 (1)
|
2 (1.5)
|
3 (2)
Function: Specifies the number of bits that follow each ASCII character received or
transmitted by the router. Selecting option 2 (1.5 stop bits) for any
AN/ANH series router defaults to option 3 (2 stop bits).
Instructions: Set according to your console requirements.
Command:
set wfSerialPortEntry.11. <port_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.11