Technical data

Using Technician Interface Software
2-6
303561-A Rev 00
Parameter: Port Disable
Attribute Name: wfSerialPortDisable
Attribute Number: 2
Default: 1 (Enable)
Options: 1 (Enable)
|
2 (Disable)
Function: Enables or disables the console port.
Instructions: Select the status of the console port.
Command:
set wfSerialPortEntry.2. <port_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.2
Parameter: Port State
Attribute Name: wfSerialPortState
Attribute Number: 3
Default: 4 (Not present)
Options: 1 (Up)
|
2 (Down)
|
3 (Init)
|
4 (Not present)
Up = enabled
Down = disabled
Init = initializing (for new instances)
Not present = the port does not physically exist
Function: Shows the current state of the port.
Instructions: You cannot change this parameter.
Command:
get wfSerialPortEntry.3.
<port_no.>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.3