Technical data

Configuring the Console Port
303561-A Rev 00
2-5
Console Port Parameters
This section describes parameters for configuring the serial (console) port on the
router. Each parameter description includes the following:
• Parameter
• Attribute name
• Attribute number
• Bay Networks default setting
• Options or range of valid settings
• Parameter’s function
• Instructions for setting the parameter
• Command you enter to configure or monitor the parameter
• MIB object ID
Parameter: Port Delete
Attribute Name: wfSerialPortDelete
Attribute Number: 1
Default: 1 (Create)
Options: 1 (Create)
|
2 (Delete)
Function: Creates or deletes an instance of a console port.
Instructions: Set to 1 (Create) to create a MIB record with system defaults for a console
port. Set to 2 (Delete) to delete a MIB record for a console port.
Command:
set wfSerialPortEntry.1.
<port_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.1
Note:
You cannot configure the following console port parameters: State,
Number, Name, and Slot.