Technical data

Configuring the Console Port
303561-A Rev 00
2-3
Using the list Command
You can list and review all serial port attributes by entering the following
command line at the Technician Interface prompt:
list wfSerialPortEntry
Using the set Command
Enter one of the following Technician Interface commands to configure a console
port parameter:
set wfSerialPort Entry.
<attribute_name>.<port_no.> <option>
set wfSerialPort Entry.
<attribute_no.>.<port_no.> <option>
set
Refers to the Technician Interface
set
command. You
must have Manager access to issue a
set
command.
wfSerialPortEntry
Refers to the MIB attribute name associated with all
serial port parameters.
<attribute_name>
Is the MIB attribute name associated with one of the
serial port parameters.
<attribute_no.>
Is the MIB attribute number associated with one of
the serial port parameters.
<port_no.>
Is the number of the serial port you are configuring.
<option>
Is the new setting taken from the Options list.