Technical data

Using Technician Interface Software

1-12

303561-A Rev 00

For instructions on changing the default values associated with the console port,

see “Configuring Console Port Parameters” in Chapter 2.

For instructions on changing the default values associated with Telnet access to

the Technician Interface, see Configuring IP Utilities.

For information about changing the default values associated with SecurID

services, see “Enabling and Disabling SecurID Authentication” in Chapter 8.

Logging Out

To exit a Technician Interface session, enter the following command after the

Technician Interface prompt:

logout

For a console connected directly to the router, the Login prompt reappears:

<User

Manager>

Password:

(if enabled)

Passcode:

(if enabled)

For a remote terminal program on a PC or workstation connected to the router by

means of modems, the following messages appear, and the Technician Interface

hangs up the telephone:

TI session logged out.

** Goodbye. **

If the Modem Enable parameter has a setting of Disable (default) and the session

terminates unexpectedly, the router does not automatically log you out. You must