Technical data

Using Technician Interface Software
C-40
303561-A Rev 00
Parameter: Log Evt Lower Bound
Attribute Name: wfSyslogEntFltrLogEvtLowBnd
Attribute Number: 7
Default: 0
Range: 0 to 255
Function: Along with the Log Evt Upper Bound, this parameter specifies an event
number (code) or range of event numbers. The numbers correspond to
event messages you want to forward to the remote host associated with
this filter.
For a complete list of event codes for each entity, see
Event Messages for
Routers
for this version of the router software.
Instructions: To specify a range of event numbers that identify messages you want to
forward to a remote host, set the value of this parameter to the low
number of the range. Set the value of the wfSyslogEntFltrLogEvtUppBnd
(Log Event Upper Bound) parameter to the high number of the range.
Any range you specify includes the values for the lower and upper bound
parameters. For example, if you specify a lower bound of 2 and an upper
bound of 7, Syslog forwards all messages with event codes of 2 through 7,
logged by the entity defined under wfSyslogEntFltrNum (Filter Entity
Name). Syslog ignores all other event messages.
To filter a specific event, set the value of wfSyslogEntFltrLogEvtLowBnd
to the code number for that event. Set the value of
wfSyslogEntFltrLogEvtUppBnd (Log Evt Upper Bound) to the same
code number. For example, to forward only log messages that have an
event code of 10, enter 10 as the value of wfSyslogEntFltrLogEvtLowBnd
and as the value of the wfSyslogEntFltrLogEvtUppBnd (Log Evt Upper
Bound).
If you do not want to filter by event code, accept the lower and upper
bound default values of 0 to 255. In this case, Syslog checks for filtering
criteria based on a message severity mask (wfSyslogEntFltrSevMask). If
you specify lower and upper boundary values of 255 (the wildcard entity
number), Syslog ignores this attribute as filtering criterion.
Command:
set wfSyslogEntFltrEntry.wfSyslogEntFltrLogEvtLowBnd
.
<host_IP_address> . <entity_code> . <filter_index> <0 - 255>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.3.1.7