Technical data

Using Technician Interface Software
C-38
303561-A Rev 00
Entity Filter Parameters
This section describes the parameters you can configure for each filter (entry) you
add to the Syslog entity filter table.
Parameter: Entity Filter Delete
Attribute Name: wfSyslogEntFltrDelete
Attribute Number: 1
Default: 1 (Create)
Options: 1 (Create)
|
2 (Delete)
Function: Creates or deletes an entity filter for the remote host at the location
defined by wfSyslogEntFltrHostIndex for this filter table entry.
Instructions: Set to 1 to create an entity filter for the remote host at the IP address
defined by wfSyslogEntFltrHostIndex for this filter table entry. Set to 2 to
delete this entity filter.
Command:
set wfSyslogEntFltrEntry.wfSyslogEntFltrDelete.
<host_IP_address>
.
<entity_code>
.
<filter_index> <1
|
2>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.3.1.1
Parameter: Entity Filter Enable
Attribute Name: wfSyslogEntFltrDisable
Attribute Number: 2
Default: (1) Enable
Options: (1) Enable
|
(2) Disable
Function: Enables or disables the entity filter associated with this filter table entry.
Instructions: Set to 1 to enable the entity filter associated with this filter table entry.
Set to 2 to disable the entity filter associated with this filter table entry.
Command:
set wfSyslogHostEntry.wfSyslogEntFltrDisable.
<host_IP_address>
.
<entity_code>
.
<filter_index> <1
|
2>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.3.1.2