Technical data

Using Syslog Messaging to Monitor Router Events
303561-A Rev 00
C-35
Parameter: Host UDP Port
Attribute Name: wfSyslogHostUDPPort
Attribute Number: 4
Default: 514
Range: 514 to 530
Function: Identifies the UDP port of the remote host associated with this host entry.
Instructions: Set the UDP port at which the remote host associated with this host entry
will receive Syslog messages from the router.
Command:
set wfSyslogHostEntry.wfSyslogHostUDPPort. <host_IP_address>
<514 - 530>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.2.1.4
Parameter: Host Log Facility
Attribute Name: wfSyslogHostLogFacility
Attribute Number: 5
Default: 184 (LOCAL7)
Options: 128 (LOCAL0
136 (LOCAL1)
144 (LOCAL2)
152 (LOCAL3)
160 (LOCAL4)
168 (LOCAL5)
176 (LOCAL6)
184 (LOCAL7)
Function: Specifies the UNIX system facility that receives and dispatches Syslog
messages from the router.
Instructions: Set the facility that you want the remote host to use for receiving and
dispatching Syslog messages from the router. Designate the same facility
in the
syslog.conf
file on the remote host.
Command:
set wfSyslogHostEntry.wfSyslogHostLogFacility.
<host_IP_address> <128
|
136
|
144
|
152
|
160
|
168
|
176
|
184>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.2.1.5